MTS FlexTest Calibration
To help ensure the quality of your test data and to make sure your MTS FlexTest Controller is operating in optimal condition, it is important to calibrate the controller electronics at least once a year. These partitioned calibrations are especially relevant in large structural test setups where it is not feasible to conduct an end-to-end calibration, but where data integrity is extremely important.
Key Benefits
Accredited
IS0/IEC accredited calibration available through North American Field Service and MTS Factory Metrology Laboratory
Fast Turnaround
Automated calibration takes half the time of manual calibration
Unmatched Expertise
Highly trained field service engineers
Data Accuracy
Fixing malfunctioning boards improves data integrity
Service Details
An MTS Field Service Engineer will arrive onsite to provide the calibration and leave a report. With controller calibration, you will receive comprehensive measurement performance data for each Signal Conditioner, A/D and D/A.
In addition, if adjustment is warranted or optimization is desired, the Field Service Engineer will consult with you regarding onsite adjustment options.
Why It Matters
Your test data is only as good as the measurement accuracy of the equipment you use to collect it. With an onsite FlexTest calibration, you can help make sure that your controller is providing the best performance possible, maximizing test data accuracy.
Get The Most Out Of Your Investment
Our experts are here to help keep you up and running.